I'm Ready TO Get Quotes For New Siding; Who Should I Contact? — 2026 Guide
I'm Ready TO Get Quotes For New Siding; Who Should I Contact?: What It Costs and What to Know
The average homeowner spends between $9,800 and $18,500 to replace siding on a 2,000‑square‑foot house. If you type “i'm ready to get quotes for new siding; who should i contact?” into a search engine, you’ll see dozens of local contractors ready to respond. You’ll pay roughly $5‑$12 per square foot for material plus labor, with the exact amount shifting by region and product choice. Most families budget around $13,000 for a complete job, though a small cottage can be finished for as little as $3,000–$8,000 when vinyl siding is chosen.
Siding Cost Breakdown (National Averages)
Pricing splits into three main buckets. Labor reflects crew wages, equipment, and cleanup. Materials cover vinyl, fiber‑cement, wood, or engineered options. Permits and fees capture local building‑department charges. Below is a realistic snapshot for a typical single‑family home.
| Cost Factor | Low End | Average | High End |
|---|---|---|---|
| Labor | $2,200 | $5,400 | $9,800 |
| Materials / parts | $3,500 | $7,200 | $12,000 |
| Permits / fees | $250 | $500 | $800 |
| Total | $5,950 | $13,100 | $22,600 |
These numbers assume a 2,000‑sq‑ft exterior. A smaller cottage will land near the low end, while a large two‑story home pushes toward the high end.
Siding Costs by Region and Major City
Regional multipliers shift the national average up or down. New York City, perched in the Northeast, typically adds 25 % to the base cost. That pushes a $13,100 average up to about $16,400. Chicago sits in the Midwest, so its price stays close to the national median at $13,200. In Chicago the building department also requires a siding permit that costs $350 and must be posted on site for at least two days. Atlanta, representing the South, trims roughly 12 % off the average, landing near $11,500. Phoenix, a Mountain West market, mirrors the national figure with a modest 3 % bump to $13,500. These examples show how location alone can swing a project by several thousand dollars.
What Affects Siding Pricing the Most
Material selection dominates the equation. Vinyl runs $3‑$6 per square foot, while fiber‑cement can climb to $10‑$15. Switching from vinyl to fiber‑cement on a 2,000‑sq‑ft home adds roughly $8,000. Labor intensity matters, too. Complex rooflines or multi‑story structures raise crew hours, often adding $2,500‑$4,000. Finally, local permit fees vary; a city with a $700 permit fee costs $200 more than a town charging $500.
How to Choose a Licensed Siding Pro
Start with the contractor’s license number. Verify it on the state’s licensing board website, every reputable pro should have a searchable record. Insurance is non‑negotiable; request a copy of general liability and workers’ compensation certificates. Look for affiliations with the Vinyl Siding Institute or the National Association of Home Builders; those memberships signal ongoing training. Red flags include vague estimates, cash‑only deals, or a refusal to provide references. Collect at least three detailed quotes before deciding; that range gives you a realistic market window.
How to Get Free Siding Quotes
Gather basic project details: square footage, current siding type, and any known repairs. Reach out to three to five contractors via phone or their online forms. Ask each for a line‑item breakdown so you can compare labor versus material costs. Most firms will schedule a free on‑site measurement within a week.
Ready to get free siding quotes? Compare licensed local contractors at HaveQuote.
Frequently Asked Questions About Siding
How much does siding cost on average in the U.S.?
Nationally, homeowners spend between $9,800 and $18,500 for a full replacement on a typical 2,000‑sq‑ft residence.
What factors change the price the most?
Material choice can swing the total by $8,000 or more, labor for complex designs adds $2,500‑$4,000, and permit fees vary by $200‑$300 between jurisdictions.
How many quotes should I get?
Three to five detailed, line‑item quotes give the clearest picture of market pricing and help you spot outliers.
How do I know a siding pro is licensed and insured?
Ask for the contractor’s license number and verify it on the state board’s website. Request copies of general liability and workers’ compensation certificates; both should be current and cover the full scope of work.
Is it cheaper in some parts of the country?
Yes. The South typically runs 10‑15 % below the national average, while the Northeast and West Coast add 20‑30 % and 15‑25 %, respectively. The Midwest and Mountain West hover around the national median.
Related Articles
HaveQuote Editorial Team
This article was researched and published by the HaveQuote editorial team. When you request quotes, you are connected with independent local contractors — not HaveQuote staff — who can discuss project scope and pricing for your area.